12V Car Automotive Fuel Injector Tester 4 Pulse Modes Diagnostic Universal Tools Kit
- List PriceUS$41.20piece
- Sale PriceUS$41.20piece
- ShippingFree Shipping
1. This tester can diagnose injector problems, you can use it on each injector,
2. Individually to test stuck, leaking or burnt-out.
3. It used 12V vehicle battery as power supply.
4. It has 4 pulse modes and in the continuous working mode ( mode 4 ), it can help,
5. You identify the injector good or not when you switch off the engine.
6. The lock mode can ensure the testing condition is same.
7. It can work with any fuel pressure tester together.
Power Supply: 12V vehicle battery
Operation Environment: 0 ℃-40℃, relative humidity<80%
Storage Environment: -10℃-50℃, relative humidity<85%
Size: 147x82x29mm (for main body only)
Weight: about 165g
1. Turn off the vehicle’s engine.
2. Connect Black / Red Clip to the Negative / Positive terminal of battery.
3. Connect pulse output terminal to the fuel injector.
4. Press the "MODE SET" key to select the desired pulse mode.
5. Press the "PULSE" key, the tester will output pulse to the injector, and then the pulse signal indicator will light as indication.
EM276 Explanations for 4 modes:
Mode 1: the tester outputs 1 pulse, whose pulse width is about 250ms
Mode 2: the tester outputs 50 pulse, every pulses pulse width is about 7ms
Mode 3: the tester outputs 100 pulse, every pulses pulse width is about 3.5ms
Mode 4: the tester outputs pulse continuously at the ate of 0 pulses per about 1450ms, very uses pulse with is about 7ms
1 X Automotive Fule Injector Tester
1 X Carrying Pouch
1 X English User Manual